Please connect to the battery first and then the panel.
Rated Discharge Current: 20A
USB Output Voltage: 5V
Total USB Output Current: 3A
DC Output Voltage: 12V
Total DC Output Current: 2A
Over Load, Short Circuit Protection: 1.5 times by rated current
Short Circuit Recovery Time: 10s
Open Circuit Voltage of Solar Panel: 40V
No load loss: 0.05W
Over Voltage Protection: 15V;×2/24V
Float Chager Voltage: 14V;×2/24V
Discharge Recovery Voltage: 12V;×2/24V
Over Discharge Voltage: 10.5V;×2/24V
Control Mode: Software Intelligent Control
Working Temperature: -35 Degree~+55 Degree
Dimension(L×W×H): 135 X 100 X 30 mm
1. Over-load protection
2. Short circuit protection
3. Lightning protection
4. Under-voltage protection
5. Over-charging protection
6. Reverse Polarity protection
Wide LCD screen display
With output switch, intelligent control, easy to operate.
Power-efficient,Microcontroller digital accuracy
PWM charging mode(SOC)
Available for DC lamp and phone charging
Use PWM&WPC mode, improve system efficiency and prolong the life span of the battery.
1 x Solar Charge Controller
1 x User Manual
2 x DC Cable
MOHOO 20A 12V 24V Solar Charge Controller Auto Switch LCD Intelligent Panel Battery Regulator Charge Controller Overload Protection
Eligible For Free Shipping
- ☆Newest Simple Connections. More Professional,With output switch, intelligent control, easy to operate,to connect the controller and the battery by cables with right polarity. The battery indicator light on the controller will be on if successfully connected, otherwise, to check and reconnect.
- ☆ Display More Information Than Others,Power-efficient, Microcontroller digital accuracy,when it's charging,the arrow between the panel icon and the battery icon will be flashes fastly,when the battery was full charge,it will be slow flashed,will stop charging,the function of the controller is to protect the voltage overshoot and discharge
- ☆PWM charging mode(SOC). With separated temperature detected circuit, high precision temperature compensation function
- ☆Available for DC lamp and phone charging. Suitable for home, industrial, commercial etc. Dimension(L×W×H): 135 X 100 X 30 mm
- ☆Wide LCD screen display. With Over-load protection & Lightning protection & Under-voltage protection & Over-charging protection & Reverse Polarity protection & Short circuit protection.To connect your load and the cables with right polarity and then connect with the load output port of the controller. Pay special attention to + - polarity to avoid reversed connection, otherwise, your load may be damaged.