160W Poly Solar Panel Module
Rated power: 160W
Short circuit current (Isc): 9.87A
Working current (Iop): 8.89A
Temperature range: -40℃~+80℃
Frame: Heavy duty aluminum
Kind of glass and its thickness: Low Iron, high transparency tempered glass of 3.2mm
SLA Battery Voltage: 12V
Dimensions: 58.2*26.6*1.4in (1480x668x35mm)
Warranty: 90% within 10 years and 80% with 25 years
45A Solar Charge Controller
Regulator with timer and light sensor
maximum charging curren : 45A
maximum loading current : 45A
Rated voltage : 12/24v
temperature compensation: -4.7mv/cell· °C
environment temperature :-20 °C ~ +50 °C
working tacitly approved : charge off voltage 13.8v/27.6v (±0.2)
load off voltage: 10.8v/21.6v (±0.2)
load on voltage: 12V / 24V (±0.2)
6 x 160W 18V poly solar panel with MC4 connector
6 x 4 Z style mounting kit
1 x 45A solar controller
1 x 16ft 12AWG Extension Solar Cable with MC4 Connector (1pc 16ft Red and 1pc 16ft Black)
4 pair Y MC4 Solar connector
ECO-WORTHY 1000W 1KW Polycrystalline 24V Off Grid Solar Panel Kit: 6pcs 160W Poly Solar Panels+45A Charge Controller+MC4 Solar Cable+MC4 Branch Connectors Pair+Solar Panel Mounting Brackets
- Complete 24 volts off grid solar panel system kit for charging 24v battery bank and DC appliances. If you want this kit to run with your AC appliances, please connect it with an off grid inverter 24v/110v. Ideal Daily Output: 4.5KWh (depending on the availability of sunlight). 25-year transferable power output warranty: 5-year/95% efficiency rate, 10-year/90% efficiency rate, 25-year/80% efficiency rate.
- Correct connection order: please FIRSTLY connect your 24 volts battery pack to the 45A charge controller, then connect controller to load (if no load, pls ignore this step), lastly connect controller to PV (Solar) array.
- The 45A charge controller has 3 pairs of 2 terminals: Solar, Battery and Load. Please connect your battery to Battery terminals, your DC loads to the Load terminals, and your PV array to the Solar terminals.
- Easy to install with Z brackets for mounting solar panels, 4 pairs Y MC4 Solar connector and 16ft 12AWG Extension Solar Cable with MC4 Connector (1pc 16ft Red and 1pc 16ft Black) for connecting PV array to the charge controller conveniently. Each solar panel comes with 1 pair of 35 inches cables with MC4 Male/Female connectors for quickly setting up.
- By-pass diodes are pre-installed in waterproof IP-65 rated juncton box to minimize power drop caused by shade and ensure excellent performance in low-light environments. Corrosion-resistant aluminum frame for extended outdoor use, allowing the solar panels to last for decades as well as withstand high winds (2400Pa) and snow loads (5400Pa).